This is the large 105mm flex disc with 12mm bolt holes. Please
refer to the cross reference links below. Not for use in the E9x/E8x.
The Revshift race flex disc frame is made from 6061 aluminum with type III hard anodizing and
utilizes high quality polyurethane bushings to maximize stiffness and
strength while maintaining an appropriate amount of flex.
FOR RACE USE ONLY! This part is very rigid and requires precise installation. The driveline must be properly aligned and all driveline components must be in good condition.
- 6061 aluminum frame with type III hard anodizing
- 95A polyurethane bushings
- Rebuildable using one of our flex disk rebuild kits
Please review the Installation instructions under the "faq/tech" section in the left side menu of this page.