These mounts are designed for a 1983-1991 E30 BMW 3-series with a 24
valve M50/M52/S50/S52 engine swap with an E21 brake booster. They use the oem motor mount bolt
holes on the E30 subframe. The mounts are angled with offset bolts to
position the engine so that proper drivetrain alignment is maintained. They are used with E36 engine brackets.Our standard BMW trans mounts are used with the ZF transmission and OEM E30 crossmember.
The flex disc adapts the 96mm/12mm ZF transmission
flange to the 78mm/10mm E30 driveshaft. It allows you retain the oem 325i
driveshaft when doing a 24v engine and ZF transmission swap. (Not
compatible with the 4-cylinder driveshaft) FOR RACE USE ONLY!
This part is very rigid and requires precise installation. The
driveline must be properly aligned and all driveline components must be
in good condition.
This kit includes:
2x motor mounts
2x transmission mounts
1x 24V swap disc (guibo)
Made by Revshift in the U.S.A. from high quality polyurethane.
Please specify the hardness.